|
NEW ASPEN 65 TON 2+3+2 SPECIFICATIONS
Msftedit 5.41.15.1503;2004 Aspen 40 Ton Tandem Axle Jeep
Model#: JT40-2 (Sales Drawing 100265S)
General Specifications
Load Capacity: 40 ton capacity 5th wheel load
Width Overall: 8'-6"
Length Overall: 24'-9"
Wheelbase: 19'-2"
Kingpin Height: 50"
Loaded Fifth Wheel Height: 50"
Tractor Swing Clearance: 84" (suitable for use with tandem drive tractors)
Jeep Swing Clearance: 168"
Main Frame:
Fifth Wheel: 12" air slide (Does not include skid ramps)
Landing Leg: 2-speed landing gear
Registration holder on driver's side
(2) pair of lifting D-rings
Full fabricated high yield main beams
24" (Aspen) mud flaps
Reinforced rear cross member for hydraulic gooseneck application
Running Gear:
Suspension: 50,000 lb. air ride with dump valve and air scale gauge in
control box with aluminum lid, control box is mounted ahead of front axle
group
Axle Spacing: 54"
Axles: (2) 25,000 lb. capacity per axle (nominal)
Tires: (8) 275/70R22.5 Bridgestone R294 ribbed 16/H ply radials, 8'-6" (Nom)
overall tire width
Wheels: (8) 8.25 x 22.5 steel, white with polished aluminum outers
Hubs: steel, 10-stud, hub piloted, unimount
Drums: outboard mount, cast
Axle Lifting Lugs: mounted on curb side of each axle
Air, Electrical & Paint
Air: air brake system to meet US FMVSS.
Brakes: 16 ½" x 7" S-cam, auto-slack adjusters, includes full function air
brake system with type 30-30 spring brakes on each axle
Electrical: DOT 12V system, 7-way connector with sealed beam rubber grommet
lighting to meet US FMVSS. Lighting included are stop/turn/tail, forward
markers and license plate light
Upgrade Standard Lighting Package to LED
Paint: Sandblasted and painted single Aspen standard colour (plastic paint)
with conspicuity tape to meet US and Canadian FMVSS.
Show Quality Paint Process with flange striping
Quantity 1
Approximate Tare Weight 6,702 lbs (+/- 3%)
2004 Aspen 65 Ton Tri Axle Removable Gooseneck Lowbed
Model#: HG65-3
General Specifications:
Load Capacity: 65 tons in 15'-0" length
Width Overall: 8'-6" nominal
Length Overall: 52'-11"
Fifth wheel height: 50"
Tractor Swing Clearance: 84"/ 108"
Deck Length: 23'-0" flush deck
Wheelbase: 41'-2" and 43'-4"
Loaded Deck Height: 24", loaded ground clearance: 8"
Gooseneck:
Narrow hydraulically removable, Aspen signature style gooseneck
Two kingpin positions with removable kingpin
Shimmable swing stops to adjust upper coupler height, and air actuated lock
pin with secondary lock for easy connection of neck.
Hydraulic system operates swing down support arms in middle of gooseneck.
Connections (¾" 241-1 Series B) to operate from tractor hydraulics (wet
kit/PTO) and includes a combo valve for future power pack installation.
Registration holder on driver's side
This trailer is designed with provisions to accommodate up to a tandem axle
jeep
Flip Over Extension 60" for 2KP GN (84"/108"/168")
Dual source hydraulic power, PTO and 13hp Honda engine. Comes with Aluminum
Door Cover
Gooseneck extension hydraulic flip (Assist) kit
Main Frame:
Decking: 3" Rough fir (outer main deck), 2" Rough fir (inner main deck)
Note: Outer planks are set ½" (Nom) above outer flanges
Double drop, four beam design,
Fully fabricated high yield main beams
Camber in the main deck is set to suit maximum rated load.
Load Secure & Storage:
One chain basket at the rear of the deck, between the main beams.
Swing Out Outriggers-Heavy Duty (23'-0" deck)(12 pair) with 5-pairs of
D-rings on deck
HD Pull-out Outriggers at Front of Deck (pair)
Rear Frame:
Aspen style 18" bolsters mounted under top flange between each axle,
including D-rings on ends, load bearing square tail design,
6" Depressed style bolster crossmembers offering deeper boom knuckling
trough
Single Axle "Slingshot" booster provision to suit Aspen TD10-1-A
Add Tandem Tag Dolly Kit (TD25-2H style) (req. S75 pin joint), Note: payload
not to exceed rated capacity of trailer
One pair of flag holders, c/w Aspen Wide load flags
One pair of Over Dimensional holders installed on 29 ½" centers
Telescopic Boom Support
S75 Pin Joint in lieu of Standard S65, comes with shims and all fasteners
Running Gear:
Suspension: Aspen 80,000 lb. Tandem axle walking beam with 25,000 lb. air
lift third axle. Includes scale gauge in control box with aluminum lid,
control box is mounted under front bolster on driver's side
Axle spacing: 60"
Axles: (3) 25,000 lb. capacity per axle (nominal)
Tires: (12) 275/70R22.5 Bridgestone R294, ribbed 16/H ply radials, 8'-6"
(Nom) overall tire width
Wheels: (12) 8.25 x 22.5 steel, white with polished aluminum outers
Hubs: steel, 10-stud, hub-piloted, unimount
Drums: outboard mount, cast drums
Air, Electrical & Paint:
Air: air brake system to meet US and Canadian FMVSS.
Brakes: 16 ½" x 7" S-cam, auto-slack adjusters, includes full function air
brake system with type 30/30 spring brakes on each axle
Electrical: DOT 12V system, 7-way connector with sealed beam rubber grommet
lighting to meet US and Canadian FMVSS. Oval mid-ship turn signals
included.
Add 3 Light Package
Upgrade Standard Lighting Package to LED
Paint: Sandblasted and painted single Aspen standard colour (plastic paint)
with conspicuity tape to meet US and Canadian FMVSS.
Show Quality Paint Process with flange striping
Quantity 1
Approximate Tare Weight 28,518 lbs (+/- 3%)
2004 Aspen 25 Ton Tandem Axle "Regulated Air" Liftable Booster with
Hydraulic Relief
Model#: TD25-2
General Specifications:
Load Capacity: 25 ton ground load rating
Width Overall: 8'-6"
Length Overall: 18'-7"
Booster Height: 38"
Wheelbase: to suit 4.2m interaxle spacing
Main Frame:
Fully fabricated high yield main beams
Includes connection for Aspen square tail and adjustable shims and hydraulic
relief system and provision to lift booster to back up
Registration holder on driver's side
Two pair chain pockets for lifting booster
One pair of flag holders, c/w Aspen Wide load flags
One pair of D-sign holders installed on 29 ½" centers
One pair of 24" Aspen mudflaps
Running Gear:
Suspension: 50,000 lb. air ride with regulator valve to adjust ground load
Axle Spacing: 54"
Axles: (2) axles 25,000 lb. Capacity per axle (nominal), includes air
operated back-up lock pin - 8'-6" (Nom) overall tire width
Tires: (8) 275/70R22.5 Bridgestone R294 Lugged 16/H ply radials
Wheels: (8) 8.25 x 22.5 steel, white with polished aluminum outers
Hubs: steel, 10-stud, hub piloted, unimount
Drums: outboard mount, cast
Includes axle chains
Air, Electrical & Paint:
Air: air brake system to meet US and Canadian FMVSS.
Brakes: 16 ½" x 7" S-cam, auto-slack adjusters, includes full function air
brake system with type 30-30 spring brake on each axle
Electrical: DOT 12V system, 7-way connector with sealed beam rubber grommet
lighting to meet US and Canadian FMVSS.
Add 3 Light Package
Upgrade Standard Lighting Package to LED
Paint: sandblasted and painted single Aspen standard colour (plastic paint)
with conspicuity tape to meet US and Canadian FMVSS.
Show Quality Paint Process with flange striping
Quantity 1
Approximate Tare Weight 7,824 lbs (+/- 3%)
|